• No products in the cart.

WiNG-RTD-868

$404.99 Add to Cart

Designed for use with the WiNG-MGR-868 and BMS-WING-868 systems, the WiNG-RTD-868 allows you to take a 1K Ohm platinum RTD (PT1000) temperature sensor and convert it to a wireless signal that can be implemented into a WiNG monitoring system.

The WiNG-RTD-868 Features:

  • Uses 868MHz radio-based communication
  • Proprietary wireless design
  • Accepts one wired 1K Ohm platinum RTD (PT1000) temperature sensor input
  • Designed with your facility’s security in mind, WiNG sensors do not have IP addresses and cannot connect to a Wi-Fi network. This ensures that they cannot be used as unauthorized wireless access points.
  • A transmission range between manager and sensors that is second to none:
    • Up to 100 feet (30.5m) through multiple walls
    • Up to 270 feet (82.3m) through one wall
    • Up to 600 feet (183m) direct line of sight
    • Add up to 1,000 feet (305m) direct line of sight with a WiNG-RXT-868 range extender
  • Unparalleled sensor battery life:
    • Up to 5 years across full operating range: -13°F to 185°F (-25°C to 85°C)
    • Up 8 years at temperatures up to 122°F (50°C)
    • Up to 12 year battery life at room temperature
  • Polling rate of 10-20 seconds

Power: 3.6V AA lithium battery

Battery Life

  • Up to 5 years when system spans full operating temperature range.
  • Up to 8 years at room temperatures up to 122°F (50°C)
  • Up to 12 years at room temperature

Shelf Life: 10 years in quiescent mode with battery installed

Transmission

  • Interval: 10-20 seconds (random)
  • Frequency: 868MHz
  • Range: Up to 600ft line of sight

Temperature Sensor Input: One input, for use with 2-wire 1000 ohm platinum (pt1000) IEC Standard 385 curve probes. RTD sensor must be purchased separately and is not included with purchase of WiNG-RTD-868 sensor.

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC – 85ºC)
  • Humidity: 0% to 90% RH (Non-condensing)
  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: CE UL61010, CSA 22.2 #61010, IEC 61326-1, FCC 47CFR 15B, IC ICES-003, EN 61000-3-2, EN61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-3; FCC ID: X7J-A11072401: IC: 8975A-A11072401

You may also like…

$404.99 Add to Cart

[]