• No products in the cart.

LC-KIT

$60.69 Add to Cart

The LC-KIT contains a 15 foot (4.57m) leader cable and one EOL terminator. Use this LC-KIT with the SC, SC-R, and SC-ZH.

Since sensing cables cannot attach directly to a controller, the leader cable connects the sensing cable to any SeaHawk leak detection controller.

An EOL terminator must be applied to the end of the length of sensing cable – it completes the leak detection circuit. Without an EOL, a length of sensing cable will register a cable break alarm.

Most RLE controllers do ship with an LC-KIT.  The LDRA6 does not ship with an LC-KIT, so you will need to purchase one LC-KIT for each zone of leak detection you wish to monitor with that controller.

Chemical Sensing Cable Leader Cable

Connections: 22 AWG, 4 Conductors, Nominal Insulation Thickness .006 in. (.01524cm), Nominal Jacket Thickness 0.010 in. (.0254cm), Nominal O.D. 0.121 in. (.307cm), Hirose 4-pin circular receptacle

Operating Environment

  • Temperature: 14° to 140°F (-10° to 60°C)
  • Humidity: 5% to 95% RH, non-condensing
  • Altitude: 15,000ft (4,572m) max.

Storage Environment: 22° to 185°F (-30° to 85°C)

Length: 15 feet (4.57m)

Weight: 4.4 oz. (125g)

 

Chemical Sensing Cable End-of-Line (EOL) Terminator

Connections: 22 AWG, 4 Conductors, Hirose 4-pin circular receptacle

Operating Environment

  • Temperature: 14° to 140°F (-10° to 60°C)
  • Humidity: 5% to 95% RH, non-condensing
  • Altitude: 15,000ft (4,572m) max.

Storage Environment: 22° to 185°F (-30° to 85°C)

Dimensions: 1.5″L x 0.5″W (38mml x 13mmW)

Weight: 0.3 oz. (11g)

$60.69 Add to Cart

[]