• No products in the cart.


$591.78 Add to Cart

Designed for use with the WiNG-MGR or a BMS system, the WIFI-CO2 is a single wireless device that measures carbon dioxide, temperature, and humidity and communicates via Wi-Fi.

The WIFI-CO2 Features:

  • Proprietary wireless design
  • CO2 module is self-calibrating, zero maintenance, and features:
    • Range of 0-2000 PPM
    • Accuracy up to 30 PPM
    • 15 year CO2 sensor life expectancy
  • Transmits on your existing Wi‑Fi network
  • Supports DHCP or static IPv4 addresses and static IPv6 addresses
  • Configurable transmission rate
  • Optional calculated dew point when used with the WiNG‑MGR
  • Affordability and reliability that are second to none

WIFI-CO2 Specifications

Power: 7.2V (two 3.6V AA lithium batteries)

Battery Life: Battery life varies based on Wi-Fi signal strength and access point performance

  • IPv4: Up to 5 years at 5 minute transmission intervals; up to 2 years at 2 minute transmission intervals
  • IPv6: Up to 5 years at 15 minute transmission intervals

Shelf Life: 10 years in quiescent mode with battery installed


  • Wi-Fi: 2.4 Ghz 802.11b/g/n, supports WEP, WPA (TKIP) or WPA2 (AES) encryption
  • IPv4: Static or DHCP
  • IPv6: Static

Transmission Interval: 1-30 minutes (configurable)

CO2 Sensor

  • Range: 0-2000 PPM
  • Accuracy: +/- 30 PPM plus 3% of reading

Temperature Sensor

  • Accuracy At Room Temperature: Typical +/- 0.2°C; Max +/- 0.4°C; Room temperature is specified as 32ºF to 140ºF (0°C to 60°C)
  • Accuracy Over Full Operating Range: Typical +/- 0.6°C; Max +/- 1.0°C

Humidity Sensor

  • Accuracy Over Standard Operating Range: Typical 2%; Max 3.5%; Standard operating range is specified as 20% to 80% RH (Non-condensing)
  • Accuracy Over Full Operating Range: Typical 3.5%; Max 6%

Operating Environment

  • Temperature: -13ºF to 185ºF (-25ºC to 85ºC)
  • Humidity: 0% to 90% RH (Non-condensing)
  • Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: EN-61326-1:2013, EN 301 489-1 V2.1.1, EN 301 489-17 V 3.1.1, Subpart B of Part 15 of FCC Rules for Class A digital devices, ANSI/UL 61010-1:2012, CAN/CSA-C22.2 No. 61010-1:2012 (3rd Edition), EN 61010-1:2010 (3rd Edition), and IEC 61010-1:2010. Contains FCC ID: Z64-CC3220MOD or Z64-CC3235MOD; Contains IC/ISED: 451I-CC3220MOD or 451I-CC3235MOD; Contains MIC: 201-170386 or 201-190033

You may also like…

$591.78 Add to Cart