24V-POE-Kit - RLE Technologies

Curated by RLE and tested by our Engineers, the 24V-POE-Kit can be used in conjunction with a PoE+ (802.3at) compliant PoE switch to power the following RLE products:

LD1500
LD2100
LDRA6
WiNG-MGR
WiNG-MGR v2

The 24V-POE-Kit includes one 24V PoE splitter and a DC power 5.5 x 2.1mm male to 5.5 x 2.5mm male plug cable to connect the splitter to your RLE controller. Use this kit in conjunction with a PoE+ (802.3at) compliant PoE switch to power designated 24V RLE products.

Note that a PoE+ (802.3at) compliant PoE switch is NOT included with this kit. You must provide your own PoE switch.

Critical Technical Note Regarding PoE and 24V RLE Products

Due to the power requirements of these RLE devices, you must make sure your PoE Switch is PoE+ (802.3at) compliant. The PoE+ standard allows for up to 25 watts of power delivery to end devices. If your switch is not PoE+ compatible you will not be able to power RLE’s controllers using a PoE splitter.

The 24V-POE-Kit Provides Isolated Power

RLE leak detection controllers require an isolated power supply to ensure effective functionality and accurate performance.

The 24V-POE-Kit has been tested and verified to provide isolated power, so you can be sure your leak detection devices will work correctly.

Click here for more information about RLE leak detection controllers and isolated power supplies.

PoE Splitter Technical Specifications

Data Ports: 1 input, 1 output

Data Rate: Splitter supports 10/100/1000; RLE devices support 10/100

DC Connector: 5.5 x 2.1 mm DC Female

Efficiency: 90%

Input Voltage: 48 to 56 volts

Max Current: 2A

Output Voltage: 24V

PoE Mode/Pinout: Mode A/B

PoE Standard: IEEE 802.3at

Operating Environment

Temperature: 32°F to 104°F (0°C to 40°C)
Humidity: 10% to 90%, non-condensing

Dimensions: 4.5″ x 2.0″ x 1.0″ (11.4cm x 5.1cm x 2.5cm); 3.0oz (85g)

Certifications: CE; RoHS